The multifunctional coupling---connection and compensator in one. Flexible pipe coupling.
发布日期:2020-05-26
The multifunctional pipe coupling is a new type of pipe connection device, which breaks the traditional connection concept. It uses stainless steel and rubber to make a component combination device to achieve the sealing and pressure bearing function. During construction, no treatment is required for the pipe end. As long as the pipe coupling is sleeved on the two pipe ends to be connected, and the side bolts are tightened, the clasp teeth can tightly bite into the pipe end surface to achieve the fixation, while the clasp teeth are tightly fixed. The sealing sleeve is tightly attached to the pipeline to achieve the locking state of tight sealing connection.Introduction of Beijing Grip multifunctional pipe coupling
1. Safe, reliable and well sealed: the new pipe connector is high-pressure and high-temperature resistant, suitable for a variety of systems, including high-temperature and high-pressure industrial pipelines. The pressure on the sealing ring is much lower than its elastic limit, far lower than the flange gasket
2. Absorb vibration/oscillation, impact and noise: this kind of connector changes the traditional rigid connection into flexible connection, so that the pipe system is in the state of impact, vibration and noise reduction.
3. Reduce the weight of pipe system: about 75% less than that of flange.
4. Save pipeline space: installation and disassembly do not need full-scale flange construction, only need to tighten the bolts, so the pipeline layout and construction space can be saved up to 50%.
5. Good compatibility and adaptability: the connector is widely used in all kinds of metal pipes and composite pipes. It can be used not only in the same material, but also in the connection between pipes of different materials. There is no high processing requirements for the wall thickness of the pipes to be connected and the connecting end face.
6. Convenient and quick installation: during the field construction, the connector itself does not need to be assembled, and the connected pipeline does not need to be adjusted and processed. During the installation, only the torque wrench is required to tighten the bolts from one side according to the specified torque, so the operation is particularly simple.